Steering Track Rod Guard
Fits Defender / Disco 1 / RRc
These Track Rod Guards bolt onto your front axle using the existing bolts and mounting points on the axle, with the earlier front axle that does not have the anti roll bar brackets fitted to the axle, 2 mounting plates are provided to attach to the front trailing arm mounting bolts to make the guard more secure.
Most heavy duty track rod arms and our own SUMOBARS will fit inside these guards to give the ultimate steering protection, there is also no need to remove the track rod ends to remove the track rod arm from inside the guard as there should be ample room inside.To remove the track rod out of the guard, undo the R/H track rod end and loosen from hub, turn steering full lock to the right and lift out the track rod end, do the same to the L/H side and turn steering full lock to the left and lift track rod end out, now the track rod arm and track rod ends should pull out through the guard.
Price £67.50 + vat, normally £75.00 + vat.
QT Diff Guard will fit on with our Track Rod Guard
You will have to cut the rear part off and drill 2 holes in the diff guard, it will then bolt onto our track rod guard to secure it.
